BROKEIR
The JY-840600 is the 84V 6A model in the 500W family: a 20S charger for 72V packs, rated 504W at the plug and built in the same 217 x 97 x 55 mm case as the other 5 models in the series. Nine amps at 48V, twelve at 36V, six at 84V. The 500W is built for packs of 30Ah and above, and for vehicles that are charged between shifts rather than overnight..
Why this model
- 6A into a 20S pack – A 30Ah 48V pack holds about 1.4kWh. At 9A and 54.6V the 500W refills it in a little over three hours; at 4A, the same pack takes eight. For a courier fleet the difference is one vehicle doing three shifts instead of two, which is usually the whole business case for the larger charger.
- 84V at the plug, not 72V – a 20S lithium pack tops out at 4.2V per cell, so the pack labelled 72V needs 84V at the output. The charger is regulated to hold that, which is why it does not drift upward when the pack is left connected.
- One case across the series – The case is 217 x 97 x 55 mm with an IEC C14 inlet, so the mains lead is detachable and can be swapped for the market's plug without changing the charger. The output cable is 1.5 m of 14AWG, terminated with the connector you specify.. A dealer stocking 500W units keeps one set of spare parts and one set of connector tips for all 5 models.
- Four protections on the board – Over-voltage, over-current, short circuit and over-temperature cut in before the cell is damaged, and the output shuts off when the pack reaches 84V.
Specifications
| Model | JY-840600 |
|---|---|
| Input | AC 85–264V, 50/60Hz |
| Output | DC 84V, 6A max |
| Max power | 504W |
| Battery | Lithium-ion (NMC / LFP), 20S (72V nominal) |
| Connector | 5.5 × 2.1 mm DC barrel (15 other tips available) |
| Input plugs | US, EU, UK, AU, JP, KR, BR, CN – fixed or interchangeable |
| Indicator | LED – red while charging, green when complete |
| Protection | Over-voltage, over-current, short circuit, over-temperature, auto shut-off |
| Housing | Sealed v0 flame-retardant plastic |
| Size | 217 x 97 x 55 mm |
| Operating temp. | −20 to +40 °C |
| Safety | UL62368-1, IEC/EN60335, EN61558, GB4943, AS/NZS60335 |
| Certification | CB, UL, CQC, CE, FCC, PSE, GS, RCM, KC, UKCA, RoHS |
| Warranty | 12 months |
What it fits
- 72VV (20S) lithium packs with a DC barrel charging port
- 72V e-motorcycles and 20S packs – the 504W output covers packs up to about 10Ah at this current
- Custom 20S packs between 4Ah and 40Ah built on NMC or LFP cells
- Replacement for a lost or failed charger where the old unit's output label reads 84V
Check this before you order
- Your pack is 72V nominal (20S). The charger that matches it reads 84V on its output label. A pack one cell larger or smaller needs a different model from this series.
- Your port is 5.5 × 2.1 mm, or you order the right tip. Fifteen other output ends are available – send a photo of the port and we match it before the order ships.
- Lithium-ion only. Lead-acid and NiMH packs need a different charge profile and will not be correctly charged by this unit.
In the box
- 1 × 84V 6A charger (JY-840600)
- 1 × 5.5 × 2.1 mm DC barrel plug, fitted
- 1 × printed voltage and safety card
If it does not charge
Test the outlet with another device first. Then look at the LED: no light at all points to the charger or the outlet, while a red light that never turns green usually means the pack is not accepting charge. With a multimeter the output should read close to 84V with no load. If it reads zero, stop there and contact us – do not open the housing.
Warranty and support
12 months from delivery. If the charger fails inside that window we replace it. Technical questions are answered in English within one business day; include your order number and a photo of the label.
Part of the 500W lithium battery charger series, which lists every output voltage in the same case. Charge-port and output plug options are on the connector page.
