BROKEIR

4 / 5

54.6V 4A Charger for 48V Lithium Battery - JY-546400

reviews
Price:
$71.99$54.99 / piece
Output connector
  • DC5.5*2.1
  • DC5.5*2.5
  • GX16 2-Pin
  • GX16 3-Pin
  • XLR
  • XT60
  • XT90
  • Anderson 50A
  • Crocodile Clip
  • Wire Nose
Input plug
  • US 110V
  • EU 220V
  • UK 220V
  • AU 220V
  • 110-220V Universal
Output current
  • 54.6V4A
Quantity: - + 9999items available
Contact Us
brokeir

The JY-546400 is the 54.6V 4A model in the 250W family: a 13S charger for 48V packs, rated 235W at the plug and built in the same 180 x 85 x 45 mm case as the other 5 models in the series. Five amps at 36V, four at 48V and 52V, three at 60V and 64V. The 250W adds the 67.2V and 71.4V outputs that e-motorcycles need, in the same flat case as the 180W..

Why this model

  • 4A into a 13S pack – The 250W exists for two reasons: packs that are bigger than a bicycle's, and vehicles that run 16S or 17S. A 60V e-motorcycle pack is typically 20 to 30Ah; at 3A it takes most of a night, and at 3A from a 67.2V output it still finishes a 20Ah pack in about eight hours, which is what the owner actually has.
  • 54.6V at the plug, not 48V – a 13S lithium pack tops out at 4.2V per cell, so the pack labelled 48V needs 54.6V at the output. The charger is regulated to hold that, which is why it does not drift upward when the pack is left connected.
  • One case across the series – The case is 180 x 85 x 45 mm, 17 mm taller than the 180W, because the output stage runs at a higher voltage and needs the extra clearance. It sits flat on rubber feet, and the fan is speed-controlled so it stays inaudible in a shop or a garage.. A dealer stocking 250W units keeps one set of spare parts and one set of connector tips for all 5 models.
  • Four protections on the board – Over-voltage, over-current, short circuit and over-temperature cut in before the cell is damaged, and the output shuts off when the pack reaches 54.6V.

Specifications

ModelJY-546400
InputAC 85–264V, 50/60Hz
OutputDC 54.6V, 4A max
Max power235W
BatteryLithium-ion (NMC / LFP), 13S (48V nominal)
Connector5.5 × 2.1 mm DC barrel (15 other tips available)
Input plugsUS, EU, UK, AU, JP, KR, BR, CN – fixed or interchangeable
IndicatorLED – red while charging, green when complete
ProtectionOver-voltage, over-current, short circuit, over-temperature, auto shut-off
HousingSealed v0 flame-retardant plastic
Size180 x 85 x 45 mm
Operating temp.−20 to +40 °C
SafetyUL62368-1, IEC/EN60335, EN61558, GB4943, AS/NZS60335
CertificationCB, UL, CQC, CE, FCC, PSE, GS, RCM, KC, UKCA, RoHS
Warranty12 months

What it fits

  • 48VV (13S) lithium packs with a DC barrel charging port
  • 48V e-bikes, scooters and golf carts – the 235W output covers packs up to about 7Ah at this current
  • Custom 13S packs between 4Ah and 40Ah built on NMC or LFP cells
  • Replacement for a lost or failed charger where the old unit's output label reads 54.6V

Check this before you order

  1. Your pack is 48V nominal (13S). The charger that matches it reads 54.6V on its output label. A pack one cell larger or smaller needs a different model from this series.
  2. Your port is 5.5 × 2.1 mm, or you order the right tip. Fifteen other output ends are available – send a photo of the port and we match it before the order ships.
  3. Lithium-ion only. Lead-acid and NiMH packs need a different charge profile and will not be correctly charged by this unit.

In the box

  • 1 × 54.6V 4A charger (JY-546400)
  • 1 × 5.5 × 2.1 mm DC barrel plug, fitted
  • 1 × printed voltage and safety card

If it does not charge

Test the outlet with another device first. Then look at the LED: no light at all points to the charger or the outlet, while a red light that never turns green usually means the pack is not accepting charge. With a multimeter the output should read close to 54.6V with no load. If it reads zero, stop there and contact us – do not open the housing.

Warranty and support

12 months from delivery. If the charger fails inside that window we replace it. Technical questions are answered in English within one business day; include your order number and a photo of the label.

Part of the 250W lithium battery charger series, which lists every output voltage in the same case. Charge-port and output plug options are on the connector page.

Recent Reviews
+