BROKEIR
brokeir
The 36V charger, in its lightest form. 42V at 1A is half the current of the 2A version, which means a slower fill, less heat and a charger you can carry in a bag instead of leaving on the floor.
Why riders pick this one
- 1A into a 10S pack – A 10Ah 36V pack goes from flat to full in about ten hours. For a scooter that is charged overnight, that is all the speed you need.
- 42V, held at the plug – Ten cells at 4.2V each. The regulation keeps the output from creeping up in the last hour, which is where packs usually get damaged.
- Half the heat of a 2A unit – Less current means less loss in the cable and the housing. On a charger that lives on a wall, that matters more than charging speed.
- Auto shut-off, red to green – Output cuts out at full charge. Safe to leave connected.
- Wall-plug body, 87 x 46 x 31 mm – Fits in a backpack pocket. 85-264V input covers US, EU, UK and AU outlets with the matching plug.
Specifications
| Model | JY-420100 |
|---|---|
| Input | AC 85–264V, 50/60Hz |
| Output | DC 42.0V, 1.0A max |
| Max power | 42.0W |
| Battery | Lithium-ion (NMC / LFP), 10S (36V nominal) |
| Connector | 5.5 × 2.1 mm DC barrel (other tips available) |
| Input plugs | US, EU, UK, AU, JP, KR, BR, CN – fixed or interchangeable |
| Indicator | LED – red while charging, green when complete |
| Protection | Over-voltage, over-current, short circuit, over-temperature, auto shut-off |
| Housing | Sealed V0 flame-retardant plastic |
| Size | 87 × 46 × 31 mm (3.4 × 1.8 × 1.2 in) |
| Operating temp. | −20 to +40 °C |
| Safety | UL62368-1, IEC/EN60335, EN61558, GB4943, AS/NZS60335 |
| Certification | CB, UL, CQC, CE, FCC, PSE, GS, RCM, KC, UKCA, RoHS |
| Warranty | 12 months |
What it fits
- 36V (10S) lithium e-scooters with a 5.5 x 2.1 mm charging port
- 36V e-bikes and conversion kits with a DC barrel input
- 36V electric skateboards and light EVs
- Custom 10S packs between 4Ah and 20Ah
Check this before you order
- Your pack is 36V nominal (10S). The charger for it reads 42V on the output label. A 48V pack needs 54.6V.
- Your port is 5.5 x 2.1 mm, or you order the right tip. Some 36V scooters use an 8 mm 3-pin port; that tip is in our connector range.
- Lithium-ion only. Not for lead-acid or LiFePO4 packs with a different full-charge voltage.
In the box
- 1 × 42.0V 1.0A charger (JY-420100)
- 1 × 5.5 × 2.1 mm DC barrel plug, fitted
- 1 × printed voltage and safety card
If it does not charge
Test the outlet with another device first. Then look at the LED: no light at all points to the charger or the outlet, while a red light that never turns green usually means the pack is not accepting charge. With a multimeter the output should read close to 42.0V with no load. If it reads zero, stop there and contact us – do not open the housing.
Warranty and support
12 months from delivery. If the charger fails inside that window we replace it. Technical questions are answered in English within one business day; include your order number and a photo of the label.
